INGENIERÍA MECÁNICA
Departamento
Carlos
González Martínez
Publicaciones en las que colabora con Carlos González Martínez (21)
2024
-
A material selection approach for protecting carbon/epoxy laminates against single and repeated low-velocity impacts
International Journal of Impact Engineering, Vol. 186
2022
-
Influence of hybridisation on energy absorption of 3D woven composites under low-velocity impact loading. Modelling and experimental validation
International Journal of Impact Engineering, Vol. 165
2019
-
Automatically processed bioinspired hierachical carbon fiber composites
ICCM International Conferences on Composite Materials
2018
-
Corrigendum to “Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design” [Compos. Part A: Appl. Sci. Manufact. 91(Part 2) (2016) 484–492] (S1359835X16000890) (10.1016/j.compositesa.2016.02.026))
Composites Part A: Applied Science and Manufacturing
2016
-
Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design
Composites Part A: Applied Science and Manufacturing, Vol. 91, pp. 484-492
-
On the effect of fibre shape in fibre reinforced polymers: Strength and toughness
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
2015
-
Ballistic performance of hybrid 3D woven composites: Experiments and simulations
Composite Structures, Vol. 127, pp. 141-151
-
Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites
Journal of Composite Materials, Vol. 49, Núm. 30, pp. 3755-3763
2014
-
Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension
Composites Part A: Applied Science and Manufacturing, Vol. 59, pp. 93-104
-
Mechanical behaviour of hybrid 3D woven composites under static and impact loadings
16th European Conference on Composite Materials, ECCM 2014
-
Modeling lightning impact thermo-mechanical damage on composite materials
Applied Composite Materials, Vol. 21, Núm. 1, pp. 149-164
-
Thermo-mechanical damage due to lightning impact in carbon/epoxy composites: Experiments and simulations
16th European Conference on Composite Materials, ECCM 2014
2013
-
Damage mechanisms of 3D woven hybrid composites in tension. Testing, inspection and simulation
CompTest 2013-Book of Abstracts
-
X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact
Composites Part A: Applied Science and Manufacturing, Vol. 45, pp. 49-60
2012
-
Mechanical characterisation of 3D woven materials against impact loads
ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
-
Modelling of the low-velocity impact behaviour of 3D orthogonal hybrid woven composites
ESMC8 - 8th European Solid Mechanics Conference
2011
-
An X-FEM implementation to analyze matrix cracking in composite materials
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011
-
Damage inspection in 3D orthogonal woven composites and plane weave fabrics subjected to both static and impact loads. Testing and simultaion
Actas del IX Congreso Nacional de Materiales Compuestos: Girona, 5, 6, 7 y 8 de julio de 2011
-
Mechanical testing and simulations of 3D orthogonal interlock fabric composites
International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2011)
-
Multiscale modeling of composite materials: A roadmap towards virtual testing
Advanced Materials, Vol. 23, Núm. 44, pp. 5130-5147