Publicaciones en colaboración con investigadores/as de Thomas Jefferson National Accelerator Facility (27)

2020

  1. Thermal emittance and lifetime of alkali-antimonide photocathodes grown on GaAs and molybdenum substrates evaluated in a-300 kV dc photogun

    Physical Review Accelerators and Beams, Vol. 23, Núm. 10

2019

  1. Compact-300 kV dc inverted insulator photogun with biased anode and alkali-antimonide photocathode

    Physical Review Accelerators and Beams, Vol. 22, Núm. 11

  2. Lifetime measurements of GaAs photocathodes at the upgraded injector test facility at jefferson lab

    Proceedings of Science

  3. New simulations for ion-production and back-bombardment in gaas photo-guns

    Proceedings of Science

2018

  1. Electrostatic design and conditioning of a triple point junction shield for a −200 kV DC high voltage photogun

    Review of Scientific Instruments, Vol. 89, Núm. 10

2017

  1. Magnetized electron beam for JLEIC re-circulator cooler ring

    Proceedings of Science

  2. Temperature dependence of alkali-antimonide photocathodes: Evaluation at cryogenic temperatures

    Physical Review Accelerators and Beams, Vol. 20, Núm. 10

2016

  1. Effect of Sb thickness on the performance of bialkali-antimonide photocathodes

    Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, Vol. 34, Núm. 2

  2. High voltage studies of inverted-geometry ceramic insulators for a 350 kV DC polarized electron gun

    IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 23, Núm. 1, pp. 418-427

2015

  1. Correlation of CsK2Sb photocathode lifetime with antimony thickness

    APL Materials, Vol. 3, Núm. 6

  2. Evaluation of electropolished stainless steel electrodes for use in DC high voltage photoelectron guns

    Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films, Vol. 33, Núm. 4

  3. Ongoing efforts to construct a 350 kV dc high voltage photogun with inverted insulator geometry

    Proceedings of Science

2014

  1. Improving the performance of stainless-steel DC high voltage photoelectron gun cathode electrodes via gas conditioning with helium or krypton

    Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 762, pp. 135-141

2012

  1. Evaluation of niobium as candidate electrode material for dc high voltage photoelectron guns

    Physical Review Special Topics - Accelerators and Beams, Vol. 15, Núm. 8

  2. Surface science analysis of GaAs photocathodes following sustained electron beam delivery

    Physical Review Special Topics - Accelerators and Beams, Vol. 15, Núm. 6

2011

  1. X-ray sources by energy recovered linacs and their needed R&D

    Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 637, Núm. 1, pp. 1-11

2010

  1. Electrostatic modeling of the Jefferson Laboratory inverted ceramic gun

    IPAC 2010 - 1st International Particle Accelerator Conference

  2. Use of multipass recirculation and energy recovery in CW SRF X-FEL driver accelerators

    FEL 2010 - 32nd International Free Electron Laser Conference

2009

  1. An inverted ceramic dc electron gun for the Jefferson Laboratory FEL

    FEL 2009 - 31st International Free Electron Laser Conference

  2. DC high voltage conditioning of photoemission guns at Jefferson Lab FEL

    AIP Conference Proceedings